Good Morning! My name is Scott Danielson with
Decore-ative Specialties and today we are going to review the process that many of our
customers use for spraying paint to match our Pure Colors finishing system. Come on!
Lets check it out! Decore-ative Specialties always recommends
wearing protective goggles, ear protection, paint suit and protective gloves before beginning
every project. Using an HVLP spray system, install a gun
tip appropriate for a medium viscosity finish. Spray one coat of primer and then let it dry. If needed, fill in any other cracks that may
have appeared. Sand with 240 grit sandpaper to prepare the
surface for paint. Spray one coat of paint. Check the color sprayed to the step panel.
If needed, scuff with 400 grit sandpaper and spray a second coat of paint. If the step panel does not require glaze,
then the painting process is complete. If the step panel does require glaze, scuff the
part with 400 grit sandpaper, switch to a larger gun tip and spray one coat of sealer. Let it dry. Apply the glaze to the entire part with a
rag. Remove excess glaze with a cheese cloth. Let
it dry. Check the color to the step panel. Spray one coat of top coat on. Let it dry. Check the step panel to confirm that the colors