Hello! I wanted to update
pillowcases on my pillows The size of the pillows is 50×70 cm. I want to share this simple and easy way with you! For such pillowcases
I took a fabric of 100% cotton satin for two pillowcases for 50×70 pillows , you need: 1.4m wide fabric from 2.2m or 2m wide fabric ~ 1.5m before cutting you need
to be sure to wash dry and ironing it well For each pillowcase you need
to cut two cuts 190x63cm and so open
cuts on both sides we twist two times and sew it on a sewn machine
I bend about 0.5 cm the stitched sections are ironed well.
we lay the fabric face up and from the stitched section, we lay 75cm and fold the fabric in half and measure another 5cm from this line
so it should turn out that is, we are from right to left
measured 75cm and put on top here they are dots of 5 cm. now here
this left part which remained bend along the marks.
need to be chopped off with top and bottom needles and sew it on a sewn machine then
I will process on overlock we sew a line to a width of allowance of 1 cm from the beginning on a sewn machine, and then I process on an overlock. ! If you do not have an overlock, then process a zigzag line on a sewn machine now we need to twist the pillowcase and
good iron it like this we should get closed sections inside. behind
inward hem after the pillowcase is ironed, from each edge we mark inwards 5 cm it will be our wings. Remains
only sew around the entire perimeter at a distance of 5 cm Now I am cleaving layers of fabric between each other and we will lay the line
where we have the entrance to the pillowcase there we also measure 5 cm and we will bend a little and lay the line here so I made myself a markup and start sewing from above where is this fold
overlap put a good tack draw a line according to the markup Here is such a pillowcase! this is a very easy and easy way I recommend that you try to sew such pillowcases, they look very unusual and beautiful Thank you for watching this video.
Until the end and see you all again!