Hey guys! Today we will be together working with table. In this episode I’m going to finish this table, let me have peace, because you see: this old table It’s just so cluttered that I don’t want to look at it anymore. I don’t want to clean it. I have it simply in the world saying: ENOUGH! All the materials you need I already have a table to make! Also only remained cutting and welding. A certain person will help me when welding everything will be easy. There won’t be any “Danube waves” because if someone doesn’t know welding too much and I’m not some kind of super welder, it may turn out that everything just ripples and then it will be difficult level this table, I will also use someone’s help. I will show you of course all the materials, which I have already accumulated. What I miss is … what I miss? I already know what I miss! I miss such a table riding on wheels, but already ordered. Also, he should come soon. Well, we can still freak out here. Here I put a nice building lamp for myself because it will illuminate simply here this wall where we will be doing. As you can see the water has started coming up again And to be honest it is a bit of a pain. Here we have some material. The legs will be made of these longer pieces. Legs will have more or less 1.10m / 1.05m high. So that I could work comfortably. Here we have one drawer. I still have five drawers. Also these drawers they will perfectly match the table. Here we have longer parts than the table And here we have the top. The worktop is covered in this way That he would not scratch but you can see stainless steel does its job. It will look cossack. And it will also work well in my opinion. As for the countertop, I plan under metal plate screw two 15mm OSB boards with each other because of that there is no 30mm plate, I was in a bit of a hurry, because I wanted the countertop to have 30mm thick, but somehow I hurried … and there is no such There were other records, but they were terribly expensive. Probably from 500 PLN per item, so I gave up it. Two such OSBs, which I needed for this table cost maybe PLN 140 also … I will show you something by the way I will stick this top for these OSBs. I have a pretty good patent. And what will I screw these two plates together so that they stick. Well, yes, I’ll stick the top on it. Steel top for OSB boards My cousin told me that when they stuck different things, then went away along with the tiles. Like a safe, which went away with the tiles should also be checked well. Besides, it’s glue for everything, apparently. And it stays great with everything. And with such screws I will screw OSB and it will also play. I twist on both sides so that held on. There is quite a lot of it, so that’s enough. Well then! This is how it all looks. I can’t even fit it in the frame too much, because this table is so huge. To be honest, how will I stand now it reaches my belly more or less. Plus they will stay there 3cm on the top. So it will be so that I won’t have to bend down doing something The whole is made perfectly, nothing is missing I think it is done solidly. Nothing will happen to this table. It will be hard to get him the wind carried away, because as I raised it it seems very heavy to me. Somewhere 80kg weighs for sure. And there will also be drawers. There will be drawers here You probably saw a pram in the pictures. It is all done so that this trolley fit perfectly under this table and acted as shelves, cupboard. I’ll show you how it will look in a moment. Go ahead and ride it. And then we go inside. ooo Stop! And that’s how it looks, though he stands uneven because he stands on boards, but that’s how it will look. He will be standing somewhere under the table. And it goes well with it. I have some tools already buried. This one won’t open. The pram itself is great, also affordable came out well, okay also qualitatively. I have nothing to complain about. There is nothing more to prolong. I’ll take you now for degreasing the entire surface. Everything is greasy and dirty. Then I will paint it all will be an anti-corrosive primer, and then I will paint it all in black to make it play with the cart and to fit the whole. Drawers are about the same color so everything will match color perfectly. Good! I take it for degreasing everything and then for painting. I turn on timelaps again and you can watch how everything will happen! One can say that the whole is there degreased. Wherever I could, I did it of course. This foundation is a great thing because it can be used for rust. So I won’t have to play with cleaning, freaking out, I’m just applying it, so to say. And tomorrow we will be painting in black. And tomorrow this table will also fold until the very end, because there is not much left. These protruding leaves are special made by they held the countertop. Here the screw will pass from below As if someone asked what this profile is: these are 4×4 profiles, about 2mm thick. Okay, I start painting. I painted the whole frame with undercoat. Now just wait until tomorrow I will lift everything gently tomorrow and paint it from below, because I don’t think it’s exactly everywhere. I’ll finish tomorrow. And tomorrow we will paint the whole thing in black. The paint has dried up. All night table he lay in the garage. Everything has dried up nicely. Now I can go ahead and paint black paint. I chose this paint. I think two layers are enough and it should cover nicely. The black matt will match the cabinet, it’s more or less the same. There is a structure here. Here you can see it. So I think that this ring boldly fits into the whole: for the table, cabinets, etc. Generally, I had to mate it all, but I don’t think it makes sense. If I put two layers of paint, it will be git. I will paint everything with a brush. Here you can see that it came out nice and even and that there are no stains. Everything will cover perfectly. Prepared brushes, part Now you can start painting 🙂 We’re flying with timelaps. The second layer is painted. Now time to wait for it to dry out a little bit. And I’m going to cut the records. We also see you in the second garage. Here, look like it looks more or less. I got a package by the way from SpeedFactoryMX. I will show you what interesting came to me. As you can see, everything is super packed, so that some nasty courier didn’t try something for you steal. I’m not saying that all couriers are like that, but there are those who like to look into packages and take something out. Here you are! I ordered 4 adhesives from Kuba. These are Manol adhesives. They are really cool. I ordered 2 types: stronger and weaker So those most needed for KTM. Their price is cool, compared to Loctite, which is really expensive. 5ml of glue cost probably from 60 PLN, and this it is probably half the price. Here, by the way, for my KTM repair kit, rear brake. And something that tigers like best, i.e. jelly beans straight from Cuba, always until packets, jelly beans are added. I generally order these packages only for these jellies. Mmmmmm how yummy! I have already screwed one of the drawers, I didn’t record it because I had to determine how exactly screw it so it looks cool and even. Now I know: just take out this drawer, I made holes here, there are holes underneath. Two holes here and there. There were holes there. I mean, they’re here only I wouldn’t put a screw in here. It’s already screwed. It keeps cool. We will now add two additional drawers. It closes nicely, the guitar plays. Here we have cut boards. I will twist them and how we will make plates and we will take care of it sticking this top to the Mammoth. And how will we have the top overwhelmed then I will finish these drawers. I don’t want to screw them yet because I can’t come here with screws from below to screw it. I take a screwdriver and screws and we’ll screw everything together screws all around. I think I’ll screw it a bit to keep everything nice. I don’t know if I talked about it, but there is no OSB 3cm thick, so I have to connect two 1.5cm plates each I think that will play. I turn on timelaps and make everything together. We’ve screwed the top here I put a stroller to show you how it looks. Just now Marcin was partly. My top is twisted, the screws are quite dense. It’s cool I raised him; nothing bends. There is a guitar. Screw plate screwed on. Now this option has come out, maybe here you will see: this shape is rounded. On top and bottom. So now I’ll take a camera And I will go to shape the shapes on both sides. Then this sheet will perfectly fit and there will be no hump like that. There is nothing to prolong: I take flex and fly! Here we already have nice rounded ones. I can’t say it it’s super done, but it’s made to fit, because I tried on the shorter part of the countertop; I put it on and it’s super cool. I have already prepared a mammoth here, two large tubes. I hope that’s enough for the whole. For this, such a squeezing gun. And now I have to get to degrease it all nicely, because it was outside for a few weeks, there is definitely some dirt there. And there is probably a factory grease, something like that on metal always. I also need to degrease it. later we will glue to the table. And the guitar. We already have both sheets degreased. Now it’s time to prepare the mammoth, gun and spread nicely around the counter. And then we glue it. When I put the whole plate, I will put it on in addition some heavy things. Make it nice press. The top is glued. To be honest this one the adhesive I spread underneath was terribly hard. And now something like that has been created the tin is slightly higher than the counter. She stuck 100% because I wanted to move one of them, I think I wanted to move the longer one. I couldn’t move her. The same, also glue without any the problem will hold it. Here from the front, you probably noticed that I did not give this glue. Because I will screw this table top here from below. I’ll make holes and I will screw it him with screws, also him I will download nicely and it will be even more rigid. I start drilling. By the way, I’ll put up here some heavy things. I will take for screwing. One night has passed. We can now take all these things. Seemingly heavy, kind of not. I thought I had more such heavy things. Kitty stretches. He slept well. I’m taking it off. And I take these screwing drawers. I screwed one already, as I said before, but now I will have to make holes from this side and from this side you will also need to screw drawers. In addition, when I arrange 2 drawers up here. It will be a space here, more or less I think from 15-20cm and I will also want to put on a piece of it. To make such a small shelf there additionally. To have extra space for arranging different things. We’ve made holes for the first drawer. Now we will arrange them and screw them all in turn upwards. Then I’ll bring an extra two and practically everything will be finished. As if one of you used to take such drawers from Brastech, it’s in sets there are always screws to screw on. Here we have screws that can be screwed directly to the countertop, and here we have screws that can be screwed to some metal table, or these bolts can be connected both cabinets together. And the guitar! We have screwed drawers. Everything is stable. The truth is that I only connected them with three screws. And to be honest it’s super-nice. Now here in this place, as I told you, stays here space. We have somewhere around 11cm here. I will give here about 1cm top. That there would be such a small shelf and that things would not fall inside the cabinet. I’m starting to go looking for material. I will probably choose a waterproof board, cut out and I’m screwing this place. The shelves are already cut out. Both. Now I will paint them with black paint. Unfortunately I did not find waterproof, maybe one day by the way if I have two pieces left I will change it. For now, he will paint them with black paint and I will put them on. I’ve already marked it from below places where there will be holes and the plates themselves I will mount the so-called lock screws. I take for painting, wait for it to dry, I drill holes and screw them. I have already made the shelves. Now the only one the thing that has to be done is to break this protective film. I didn’t break her so as not to damage this sheet. How can be seen; she relaxed goes down, you don’t even need to heat it with a heat gun. Here this fault does not bother, it is not somehow terribly noticeable, you can’t even see it that much. I take the film off. I will show you the final effect just below the wall, together with the pram. So, as you can see, we’ve finished the table. This is the first piece of the puzzle in other words, our entire garage. For the next elements you won’t have to wait long because I plan to start making sandblasters as well as steam other things, for example, a stool this table so I don’t have to stand, and a couple other, but very important things. Generally, it took me 3-4 to build the table days off and on. Cool that I managed to embrace the person who helped me to sing the frame, it relieved me a bit of my duties, I didn’t have to weld it yourself, because it is troublesome and I do it I can’t do 100% well I am very happy that a good person was found, who helped me with this. This project has consumed some money, but I hope that the table will stay, I think on 10-15 years. Without any problem and without any repairs, because it’s so coarse, heavy that we couldn’t move him. We had to use some long logs to move it at all. I think it weighs somewhere around 200kg. It is a very solid construction that will do its job, and he’ll hold for a few years my garage. I will show you now more or less how it looks here. Thanks to Brastech I was able to get such nice drawers. I got six of them. They are at a great price. They are very durable coarse and hard to destroy. They endure everything. I slowly started them here complement. I also recommend if you would like to do such a thing a table like me, these drawers are perfect. Here, by the way, I have such a pram. In which I also have a lot of lumber already hidden. There could not be new boards tool. Those mine were already enough damaged and did not match present design, now I think that everything fits perfectly. I like everything well composed; color. I will tell you now that we will paint the walls are gray from below and up there will be two stripes, orange and green according to the logotype our. And the ceiling and the rest the walls will be white. There will be a lot of light that’s good will affect quality. As for the countertop itself I have already found one minus, namely that it is cold. And I often stand at the counter I lean on my stomach. And not to catch a cold I thought of such a sponge. This there is a protective sponge for pipes. I will resist he leaned on it and it will be comfortable, it will be nice to work with something like that and I won’t catch a cold by the way. This of course can be removed. If it’s not needed, I’ll just take it off. It can be put off somewhere and it’s cool. Thanks to the fact that I bought new boards, I arranged for myself a little bit of these hooks. Now I have everything hung, from the old board I managed to embrace such key hangers. For some of the keys without eyelets I hung here. There is not a large part yet, I will have to I found her in the garage because I started cleaning up as you can see there is no more crap here, but no on the back is a mess which I have to clean up. kitty Well, as you can see everything went great, I really like this table, I’m from it very pleased, and I’m sure it will be he bravely served here in our garage life, and I forgot about one more very important thing: t-shirt draw about I said in the previous film will take place in another film, you can find the link to it in the description. Well, thank you for watching. I hope you enjoyed the episode! You can subscribe, like. Write what you think about such a table. Leave some comment for coverage and I will maybe one of these comments will be drawn and I’ll send him a sticker like here. I invite you also to our Facebook, Instagram, as well as our facebook group, on which we also put some backstage photos and various cool materials. And it also develops quite there interesting community. Thank you for watching. I hope you enjoyed the episode. See you and bye!