Hello. It’s been a long time since I said hello. I took the process of making this. It’ll probably take a while to go up. (It’s 9:00 p.m.) I ate bread late at night.) It’s been a while since I uploaded the video.
I’ll give you some memorable information. In outdoor carpentry, you use a lot of zinc-plated screws. In my case, when I was making indoor furniture,
Just use galvanized screws.
(There are a lot of galvanized screws in the studio.) The screws vary in length.
32mm, 38mm, 50mm, 64mm. I bought this case from Dioso. When I make furniture, it’s one of the things I usually do.
It’s a piece-gathering method. If you don’t drill the screws,
There are many bursts of trees. Let me show you how to adjust the drill length. “I’ll use 38mm.”
Then, it’s less than 38mm or less. I use a hexagonal wrench to adjust this.~ You can do it with a hexagon wrench. Put the drill blade in the double drill bit. This is where you hold them.
And you put in more than that. Like this. Let’s catch it. And after you put it in like this, the end of your hand. “That’s enough to get me here.” I mean, like this.
You can lock the wrench. When it’s tight, it’s hard to say it’s salty.
≡ But the key thing is that when you use a day like this. It’s impossible to exceed 64mm if the days are short. More than half of them just put in a raw screw-ups.
It could explode. The tree Split up. It’s not a double drill day.
You just need to put in a drill blade and use it. Let’s set it up now.
It’s a pull-out adjustment Like this. It’s a bit shorter than the 64mm piece If the drill blade is short… at a hardware store or online shopping mall.
It’s good to buy a long drill day. So, actually, I’m going to use this screw once.
I’ll combine trees with trees. When you do it as a hobby at home or in the studio,
I don’t need a lot of impact drills or drillers. It only takes one or two. For example, if you have one of these drill drivers. You can also change the double drill bit by undoing it.~ in the process of replacement You can also use the cross beat.
For your convenience, I’ll put this back together. I’ll adjust the drill blade a little shorter than the piece. Give it a little bit of a bit Put it in and tighten it again. example stationary screen I’ll just look out the screw before I drill a hole. I’ll try to be more extreme at the end. T_T If you look, you can see these cracks. I don’t know how much free space you’re gonna have to have.
It’s a way to minimize cracks in trees. I’ll put a screw in the end. I’ve drilled like this. I moved it to show you now.
That changes the position of the two holes. You have to be sensible in times like this.
Just pop the piece out a little. You’re going to hit the hole.
When you hit it, you should move your eyes towards it. You can tighten the screws like this. The hole we’ve drilled is about 36 millimeters. We’ll use a double drill bit to adjust the distance of the neck. Now, this is 20mm wood, and I’m not sure how far I’m going to go
We can decide if we’re going to drill for us. It’ll be less than half the price.
Too much will weaken the structure. One of the two.
Let’s get closer and do a shoot. If you look at the wooden tree, there are two things. The one on the right has a vertical nodule. The one on the left is horizontal. It’s not like I’m wearing a wooden stick in the same direction.
When a tree contracts and expands To shrink or stretch in equal measure.
It’ll be the same as when things change. The woodcutter paints the bond, hits it with a hammer, and then hits it.
You can use a plug-top to cut it. You don’t have to use good woodcuts. We have ‘205 Bond’ or ‘Tight Bond 1. 2. 3.’ It’s safe to use whatever you use. I think it’d be good to use what you have. It’s good to use it in a small way. I’ll paint it a little bit It’s hard to put it in your hands.
It’s convenient to use a rubber hammer. TOG.TONG.TONG.TONG.TONG.TONG.TONG. So I put it like this. I’m dry because of the time.
I’ll cut it with a plug-top. Wipe out the spilled bond. If you touch it, there may be a short difference.
In that case, they sandpaper it. a sandpaper is a thick particle, a medium particle, and a fine particle.
100 rooms, 200 rooms, 300 rooms, 400 rooms.
There are so many. The lower the number, the rougher it is.
The higher the number, the better.
Start with the bold one and proceed with the fine sandpaper. In this case, we have 100 rooms.
And then there’s.
And then 400 rooms. Finish in this order and the noodles will soften. Doing sandpaper-scraping hard. My mouth is watering. You can use screws to make furniture easily. There are many ways to assemble furniture.
It’s the easiest, most convenient,
I think it’s a practical way. I can see it ended on a wooden ladder like this. I don’t know how the video was fun. I don’t know much about it,
I hope we can share and help you. Next time, I’ll come back with another story. Thank you for watching.